账号:
密码:
首页 | 组件(模块) | 开发板 | 开发工具(箱) | 代理商 | 原厂 | 订单状态 | 客户服务 |
新品搜寻 ﹕ 方法﹕
 
DS1206N BASIC测试/开发板
原厂/品牌: 集博 上架日期: 04/14
供应商: 集博 產品類別: IDE

     DS1206N为BASIC可程序化测试板,主要设计做为serial-over-IP及串行埠控制设备的测试及开发之用。由于尺寸小巧,所以可以直接安装于您所设计的产品内。DS1206N提供您另一个快速发展的嵌入式开发平台,而完全不用另行设计硬件的PCB板。

     就多信道RS232通讯功能上,就相等于DS1206 控制器。DS1206N只有一个RS232接头,而且价格也等同于一个RS232连网服务器。但就功能而言,DS1206N具备4个独立RS232信道。如果在某些应用中不需使用原本的DSR及DTR,便可转为另一组RX及TX。也不需要CTS及RTS?很好,我们也可以转为另一组RS232信道。我们共规画了15种RS232信道组合供您弹性选择使用。

     DS1206N共有三款提供不同串行埠讯号准位,集博并提供完整的serial-over-IP应用程序供您免费下载使用。

零件编号 封装 规格说明 单价 庫存 最小量 购量
DS1206N 以EM1000为核心,针对 终瑞设备 及自动化设备 开发的最终极开发平台。硬件包含搭载EM1000的主板、LCD显示板(共有3款供选择)、键盘、串行端口、I/O板及)GA1000 Wi-Fi附加模块(选用)。       2 周 1

Available models

The board is supplied in three modifications.

The DS1206N-RS is, essentially, a DS1206 device without a housing. The board has a proper RS232 port (RS232 transceiver IC and DB9M connector), as well as the power regulator ("12V"-to-3.3V). There is also a power switch that controls "12V" power output on pin 9 of the DB9M connector.

The DS1206N-TM is different from the "-RS" version in that it has a TTL serial port and no power switch. The port is accessible through a 12-pin connector on the PCB. The power regulator of the board can be used to supply 3.3V power to the attached serial device as well.

Finally, the DS1206N-TS is like the "-TM" version but has no "12V"-to-3.3V power regulator. Instead, an attached serial device is supposed to provide stabilized 3.3V power to the board.

 

Available models and their features

DS1206N-RS

(RS232)

DS1206N-TM

(TTL master)

DS1206N-TS

(TTL slave)

Setup button

YES

Status LEDs

YES

RS232 transceiver & DB9M connector

YES

NO

TTL interface connector

NO

YES

Power switch

YES

NO

Power jack and "12V"-to-3.3V regulator

YES

NO

 

Hardware features

Superior upgrade to the EM1202EV board.
Based on a high-performance purpose-built 88-MHz T1000 ASIC.
10/100BaseT auto-MDIX Ethernet port (automatic detection of "straight" and "cross" cables).
Up to 3.5 serial channels:

- DS1206N-RS: RS232 port (DB9M connector);

- DS1206N-TM and "-TS": TTL serial port (pin header);

- Baudrates of up to 921,600bps;

- None/even/odd/mark/space parity modes;

- 7/8 bits/character modes;

- Full-duplex mode with optional flow control;

- DS1206N-TM and "-TS": half-duplex mode with direction control;

- Flexible mapping with 15 different options, such as:

    - A single channel: RX, TX, CTS, RTS, DSR, and DTR lines;

    - 3.5 channels: RX, TX, RX2, TX2, RX3, TX3, and RX4 lines.

- DS1206N-RS: optional "12V" power output on DB9M connector (software-controllable);

- DS1206N-TM: optional "12V" power input from the serial port (instead of supplying power through the power jack).

512KB or 1024KB flash memory for firmware, application, and data storage.
2KB EEPROM for data storage.
Four LEDs:

- Green and red status LEDs on top of the device;

- Link and speed Ethernet status LEDs on the RJ45 jack.

Software-controlled onboard PLL to select the clock frequency of the device: 11.0592MHz with PLL off, 88.4736MHz with PLL on.
Power:

- DS1206N-RS and "-TM": onboard regulator, 10-24V input range (12V nominal);

- DS1206N-TS: direct 3.3V input (must be regulated to +/- 5%).

Board dimensions: 52.6x38.0mm.
Firmware and Tibbo BASIC application are upgradeable through the serial port or network.
Tibbo BASIC application can be debugged through the network and no additional debugging hardware, such as in-circuit emulator, is required.
Also available as a DS1206 (DS1206N board with housing).

Programming features

Variable Types: Byte, char, integer (word), short, dword, long, real, string, plus ser-defined arrays and structures.
Function Groups: Strings functions (21 in total!), date/time conversion functions, and hash calculation functions (md5 and sha1).
Platform objects:

- Sock — socket communications (up to 16 UDP, TCP, and HTTP sessions);

- Net — controls Ethernet port;

- Ser — in charge of serial channels;

- Io — handles I/O lines, ports, and interrupts;

- Fd — manages flash memory file system and direct sector access;

- Stor — provides access to the EEPROM;

- Romfile — facilitates access to resource files (fixed data);

- Pat — "plays" patterns on green and red status LEDs;

- Button — monitors the setup button;

- Sys — in charge of general device functionality.


新品讨论
  产品捷报
Micro Focus推出新机器人流程自动化产品 加速企业生产力增长
ADI MeasureWare革新精准量测 使用户更准确解读周围世界
嵌入式与视觉运算的智慧应用入门 安提国际推出MXM模组开发套件
Vicor推出隔离式稳压DC-DC模组的低功耗DCM2322系列
Tektronix推出全新Double Pulse Test软体 有效简化电源效率测试
  最新活动
台湾创新技术博览会
英特尔工业物联网技术研讨会
台湾国际医材制造及零组件展
百货及量贩店业节能技术研讨会
工业4.0数位化与云端化创新论坛
刊登廣告 新聞信箱 读者信箱 著作權聲明 隱私權聲明 本站介紹

Copyright ©1999-2019 远播信息股份有限公司版权所有 Powered by O3
地址:台北市中山北路三段29号11楼 / 电话 (02)2585-5526 / E-Mail: webmaster@ctimes.com.tw