CTIMES - 新品中心

首頁 | 元件(模組) | 開發板 | 開發工具(箱) | 代理商 | 原廠 | 訂單狀態 | 客戶服務 |

SmartFusion Evaluation Kit

原廠/品牌：	ACTEL	上架日期：	04/13
供應商：	大志科技	產品類別：	FPGA

Actel's SmartFusion Evaluation Kit offers a simple, low-cost way to try the world's only FPGA with hard ARM Cortex-M3 and programmable analog. The device contains on-chip flash and on-chip SRAM memory, as well as additional SPI flash memory. The board can communicate via Ethernet and HyperTerminal. The board also contains LEDs, switches, OLED and various voltage, current, and temperature monitoring functions for analog experimentation on the board.

The kit is supported by Libero Integrated Design Environment (IDE), Actel's design software that includes SoftConsole Eclipse-based GNU software IDE. You can also use a free evaluation version or full licensed version of either Keil or IAR Systems compilers. The quickstart card and the user's guide will walk you through the options for software, downloads, and licensing.

零件編號	封裝	規格說明	單價	庫存	最小量	購量
A2F-EVAL-KIT		SmartFusion Evaluation Kit	洽詢	2 週	1	洽詢

The SmartFusion Evaluation Kit board includes:

A2F200M3F-FGG484ES
- 200,000 System FPGA gates, 256 KB flash memory, 64 KB SRAM, and additional distributed SRAM in the FPGA fabric and external memory controller
- Peripherals include Ethernet, DMAs, I²Cs, UARTs, timers, ADCs, DACs and additional analog resources
- Refer to the SmartFusion product page for full device information
SPI-flash memory connected to SPI_0 on the device
USB connection for programming and debug from Actel's design tools
USB to UART connection to UART_0 for HyperTerminal examples
10/100 Ethernet interface with on-chip MAC and external PHY
RVI header for application programming and debug from either Keil or IAR Systems
Mixed-signal header for daughter card support

User Inputs and Outputs

OLED display with I²C interface connected to I2C_0 on the device
First-order ΣΔ DAC (sigma delta) output with 12-bit 500 Ksps update rate
Potentiometer used to vary voltage input for voltage and current monitoring
8 LEDs connected to the FPGA fabric for FPGA demonstration
2 user input switches connected through FPGA fabric
Both LEDs and switches can be used with GPIO by connecting through the fabric
Selector to choose between GNU SoftConsole or RVI-Header for debug
Selector to switch between programming the device (fabric) and debug mode
On-board 20 MHz crystal for system clock
On-board 32.768 KHz for RTC
5 user I/Os for debug
Option to use internal 1.5 V regulator

新品討論

產品捷報

	Microchip安全觸控螢幕控制器系列新品提供加密驗證和資料加密功能
	Transphorm與偉詮電子合作推出新款整合型氮化鎵器件
	ST高成本效益無線連接晶片讓eUSB配件、裝置和工控設備擺脫電線羈絆
	u-blox新推兩款精巧型模組內建最新Nordic藍牙晶片
	博世在輕度混合動力系統中採用 DELO 黏合劑