CTimes / 產業新品推廣中心 / NXP-LPC812M101FD20
 
NXP-LPC812M101FD20
原廠/品牌： NXP 上架日期： 06/20
供應商： NXP 產品類別： MCU

     The LPC812M101FD20 is an ARM Cortex-M0+ based, low-cost 32-bit MCU operating at CPU frequencies of up to 30 MHz.

     The peripheral complement of the LPC812M101FD20 includes 16 kB of flash memory, 4 kB of data memory, CRC engine, one I2C-bus interface, two USARTs, one SPI interface, multi-rate timer, self wakeup timer, state-configurable timer, one comparator, function-configurable I/O ports through a switch matrix, an input pattern match engine and 18 general purpose I/O pins.
零件編號 封裝 規格說明 單價 庫存 最小
購量		 訂購數量
LPC812M101FD20FP SOT163-1 (SO20) 32-bit ARM Cortex-M0+ microcontroller; 16 kB flash and 4 kB SRAM    電洽 0週交貨 1 電洽

功能和優勢
  • ■System:
    - ARM Cortex-M0+ processor, running at frequencies of up to 30 MHz with single-cycle multiplier and fast single-cycle I/O port
    - ARM Cortex-M0+ built-in Nested Vectored Interrupt Controller (NVIC)
    - System tick timer
    - Serial Wire Debug (SWD) and JTAG boundary scan modes supported
    - Micro Trace Buffer (MTB) supported
  • ■Memory:
    - 16 kB on-chip flash programming memory
    - 4 kB SRAM
  • ■ Boot ROM API support:
    - Boot loader
    - USART drivers
    - I2C drivers
    - Power profiles
    - Flash In-Application Programming (IAP) and In-System Programming (ISP)
  • ■ Digital peripherals:
    - High-speed GPIO interface connected to the ARM Cortex-M0+ IO bus with 18 General Purpose I/O (GPIO) pins with configurable pull-up/pull-down resistors
    - GPIO interrupt generation capability with boolean pattern-matching feature on eight GPIO inputs
    - Switch matrix for flexible configuration of each I/O pin function
    - State Configurable Timer (SCT) with input and output functions (including capture and match) assigned to pins through the switch matrix
    - Multiple-channel multi-rate timer for repetitive interrupt generation at up to four programmable, fixed rates
    - Self Wake-up Timer (WKT) clocked from either the IRC or a low-power, low-frequency internal oscillator
    - CRC engine
    - Windowed Watchdog timer
  • ■ Analog peripherals:
    - Comparator with external voltage reference with pin functions assigned or enabled through the switch matrix
  • ■ Serial interfaces:
    - Two USART interfaces with pin functions assigned through the switch matrix
    - One SPI controller with pin functions assigned through the switch matrix
    - One I2C-bus interface with pin functions assigned through the switch matrix
  • ■ Clock generation:
    - 12 MHz internal RC oscillator trimmed to 1 % accuracy that can optionally be used as a system clock
    - Crystal oscillator with an operating range of 1 MHz to 25 MHz
    - Programmable watchdog oscillator with a frequency range of 9.4 kHz to 2.3 MHz
    - 10 kHz low-power oscillator for the WKT
    - PLL allows CPU operation up to the maximum CPU rate without the need for a high-frequency crystal. May be run from the system oscillator, the external clock input CLKIN, or the internal RC oscillator
    - Clock output function with divider that can reflect the crystal oscillator, the main clock, the IRC, or the watchdog oscillator
  • ■ Power control:
    - Integrated PMU (Power Management Unit) to minimize power consumption
    - Reduced power modes: Sleep mode, Deep-sleep mode, Power-down mode, and Deep power-down mode
    - Power-On Reset (POR)
    - Brownout detect
  • ■ Unique device serial number for identification
  • ■ Single power supply
  • ■ Available as SO20 package
應用
  • ■ 8/16-bit applications
  • ■ Consumer
  • ■ Climate control
  • ■ Lighting
  • ■ Motor control
  • ■ Fire and security applications